How to change batteries in 570V Smart Core

How to change batteries in 570V Smart Core

The Verroo app (home page) will indicate the battery level. Change the battery when 40% or bellow immediately

You will need 2 x CR2 Battery (900mAh recommended) and a small Phillips screw driver. 

Unscrew the 2 x small Phillips screws without removing them completely from the case 

Pull out the old battery and place in the new, ensuring the positive end of the battery is orientated downwards (bottom) 

Replace battery casing by first seating it in at the top, then gently pushing the bottom towards the door. 

Re-tighten the two Philips screws


    • Related Articles

    • How to change battery in 3900 or 3950 Smart Strike

      You will need 1 x CR2 Battery (900mAh recomended) and a small Phillips screw driver. Open the door and remove the 2 x small Phillips screws that secures the battery cover faceplate (per image below) Pull out the old battery and place in the new, ...

    • How to set up a new Smart Strike, Smart Lock or Controller

      First download the current Verroo App from Google Play or Apple App Store. After installation, you will be prompted for an action - Choose 'Set up new device' If you have skipped this, you can go to 'Add +' on the home screen, then select 'Set up a ...

    • What range should I expect from an XKey smart lock?

      The standard XKey smart strike has a range of around 5-6M when installed in an aluminum door frame. The range should be slightly longer when in a wooden or steel door frame. If range is an issue - the strikes are available in a long range version, ...

    • How to factory reset a Verroo device (Smart strike or controller)

      Video tutorial below. Written instructions as follows: Step 1. Open the Verroo app and click on the 'Menu" icon located to the top left hand side. Step 2. Click on factory reset. Step 3. Click yes to proceed. Step 4. Scan the QR code, this unique ...

    • How to adjust hold open time of an XKey managed lock

      Log into the XKey app In the smart device listing, click the small circle with three dots - this will open a pop up. Next click settings. Adjust the hold open time with the slide bar to the desired setting and hit save.